STRAIGHT HAIR. Contact of iron with the straightening product or the hair
covered with the product must be avoided at all times

Step 1: Shampoo

Shampoo hair twice with Argan Oil Pre Straightening Shampoo.
For the third time, leave the shampoo in the hair for at least 2 minutes to bring the hair’s pH level to 9.2 so that the hair is free of silicone residues and allow optimal penetration of the straightening product into the hair structure.

Step 2: Drying

Dry your hair properly with a paddle brush, preferably with a hair dryer

Step 3: Apply

Apply the product with a bowl and a brush.

Step 4: Wait

Leave the product on blonde hair for 45 minutes. Leave the product on natural or very curly hair for an hour. and after the first half hour (use of a hat is recommended) check the ends. If the ends have dried, it should be sufficient to add 10 to 20 g of product to the ends. Switch to heating until the end of the waiting time. At the end of the waiting period, dry the hair with a hair dryer without a diffuser (so that the product does not evaporate) until the product is completely dry and hardens at the roots

Step 5: Wet and Rinse

Moisten the hair in cold or lukewarm water for 10 seconds with a slow stream without rinsing the product, then foam for about half a minute and comb thoroughly using a cutting comb – first on the wide angle side and then on the close side. Wait 5 to 10 minutes. Wash the entire product in cold or lukewarm water. Tip: Those who are used to not washing the whole product can definitely continue to work this way.

Step 6: Iron

Dry your hair thoroughly with a hair dryer before you start ironing.
We recommend that you use BaByliss Pro Straightener, which is
specially designed for straightening and reaches 230 degrees. Iron layer in medium-sized hair for 15 seconds for the first time and repeat the operation 10 times faster. Natural and colored hair can be ironed at 230 degrees. If the hair is damaged, has many split ends, the hair should be ironed separately (without the ends) at 230 degrees and then lower the temperature to 190 degrees and iron 4 layers of damaged ends together in a controlled manner. Blonde hair should be checked before ironing – take a layer of hair from the center of the head and iron at a temperature of 180-200 degrees. If the hair turns yellow – reduce the heat. You can reduce it to 160 degrees

Step 7: Short wait

When the ironing with the straightener is complete, cool the hair with a hair dryer on the cold setting and wait for 10 minutes.

Step 8: Rinse

Rinse the product thoroughly and shampoo your hair twice with an Argan Oil Shampoo that is suitable for straightening the pH.

Step 9: Mask

Spread a suitable Argan Oil Mask generously. Comb with a cutting comb – first on the wide tooth side and then on the tooth side and wait 10 minutes, preferably while heating, to neutralize the straightening

Step 10: Serum

Sprinkle about 10 drops of Argan Oil Serum and dry your hair for a perfect result!